Choosing the Right UPVC Door Handle Replacement
It's easy to replace your handles made of upvc however choosing the best handle can be a challenge. Modern double-glazed handles are fitted with spring cassettes, whereas older handles do not.
If the handle of your upvc is loose and floppy, there could be an issue with the internal parts of the multipoint lock. This article will discuss several possible problems & their causes.
Handles that slide or loosen
UPVC handles can withstand wear and tear, particularly in older properties. The most common reason a handle becomes floppy is due to a broken spring cassette inside the door lever. This is usually caused by excessive force and the square spindle that supports the cassette could be moved or rounded off.
The good news is that a uPVC door handle replacement is an easy task and can be completed in a matter of minutes. The first step is to take off the handle unit that was previously used. To remove it, loosen the fixing screws that are visible on the back of the lever. After the handles have been removed, you can remove the cassette from the square spindle and replace with the new one.
Online you can choose from a range of uPVC handles that come with different finishes. The finish you choose will determine the durability of your handle and how it will be easy to clean. Finishes such as Resista, Stainless Steel, or PVD are designed to resist corrosion and last up to 25 years.
After you have selected a colour or design, you can select the kind of handle you require. The most popular are the lever and pad configurations. Lever pads are commonly used to block access by unauthorised persons. They have an inside lever and a paddle on the outside.
The next step is to measure the dimensions of your existing handle and write them down. You'll need the PZ dimension (the distance from the screw hole to the centre of the lever), the length of the handle as well as the size of the keyhole. Once you have these measurements, you can then compare them with the handle sizes matrix to find the correct replacement.
Broken springs
Over time, uPVC handles may become wobbly or loose. The spring cassette could also break. These little springs help to move the lever into a horizontal position and without them, your doors will not lock properly.
Modern uPVC handles are made with these cassettes built directly into the backplate. However, older uPVC doors typically include these springs in the lock mechanism. It's not something you can repair by yourself, but it's definitely worth having your locksmith examine the situation as this could be the reason for the sagging uPVC handles.
The most common issue associated with uPVC handles is that they loosen as time passes. This is usually caused by worn-out springs that are simple to fix. The majority of the time the reason for this is excessive use of the handle, and as a result the square spindle inside the handle will wear out, causing the springs to shift out of position.
In order to rectify this issue, open the door and remove the fixing screws located at the back of the handle plate. This can be done using the help of a Philips screwdriver. After the screws have been removed the handle can be removed. The plates for the handle can then be removed. Then you can take off the old springs and replace them with fresh springs.
This is important to note when purchasing a replacement handle. This measurement is referred to as the PZ measure. It is recommended that this is taken with a calibrated tape measure to ensure accuracy.
After reinstalling the springs, you should be able to operate the handle with no issues. It's worth lubricating your internal mechanism to ensure that everything is working exactly as it should. This will ensure that your uPVC door is as secure as it can be, and also increase their comfort in the long run.
Handles that slide around
Handles that slide could be caused by many things. One of the most common causes is when the levers of the handle are not aligned with the lock. This can happen on both uPVC doors as well as composite doors. However, it's more evident on older doors as they are made of cheaper materials that don't stand up to the elements.
This issue can be resolved by a professional, who will adjust the handles and ensure that they are in line with the door lock. They'll also examine the lock itself to see whether there's anything that requires fixing. In many cases, a minor adjustment to the springs of the handle will solve this problem.
It's easy to replace your uPVC handle however, you must measure the handle that you are replacing to ensure that the replacement is the correct size. You will need to measure the distance of the two screws, as well as the dimensions of the keyhole and lever, and the distance between them. You can then use this uPVC handle size guide to locate the correct replacement for your home.
Once you have the measurements The next step is to eliminate the current uPVC handles. It is usually quite easy and requires only a screwdriver to reach the screws on the inside of the door. Once the screws are removed, you'll need to take off the handle, and then put in the new handle.
Before starting making any changes, make sure that the door is secured open by a wedge to prevent it from closing in the middle of your work. After you remove the handle, you'll be able to inspect the components underneath the door that are causing the door to slide.
A handyman from Fantastic Services will be able to help if you don't want to do the work yourself or lack the nerves. They will employ specialist locksmith opening techniques to open the door without causing damage and will then replace the damaged handle and make sure that everything is in place and functioning as it should be.
Gearbox damage
A damaged gearbox could cause the door handle made of upvc to become stiff or lose its function. This can also prevent the lock from being able to be opened with the use of a key. This can be very dangerous and should be dealt with promptly. It is crucial to contact a locksmith if you are unable to solve the issue yourself. They have the equipment and knowledge to do the job right.
The first step is to remove the handle from the cover plate. You can do this with a screwdriver that has flat-headed tips. After you have removed your handle, you are able to remove the middle screw that holds the barrel in position. After removing the middle screw, you'll be able to loosen the two screws that are holding the barrel. Then, you can remove the barrel from the door. To do this, you will need someone to prop the door wide.
After you have removed the cylinder, you can replace with a brand new cylinder. Make sure that the new cylinder is the exact dimensions as the old one. In the event that it isn't, you could end up with an unaligned handle correctly. This could lead to a number of problems, including leaks and draughts.
Many upvc door handles have slots that allow for adjustment. These slots can be used to tighten or loosen the handle. The slots are typically located on the inside of the doors, near the place where the handle meets with the cylinder. The adjustment slots can be tightened by using an allen wrench. Once Repair My Windows And Doors have made the adjustments, you can put the handle back on & screw it in. Then, you'll be able to test the handle to be sure it's working correctly.
The door handle of upvc becoming loose when closed is typically an indication that the spring or gearbox components have broken down. This could cause the upvc multipoint lock to fail, leaving your door open to intrusion. If this occurs, it is necessary to replace the upvc gearbox. It will cost between PS145 between PS145 and PS280 inclusive of labour.